These Iron on logo transfers are a super easy way to get your logo on your products. The sheets come in 8.5 x 11" size. There is no average size logo, so its hard to determine the qty you will get but for example a 3 1/2" x 1 3/8" logo would net 14 transfer per sheet. (pictured)

Please email your logo files to bradyswoodcraft@gmail.com with your order number. A rendering will be sent before your order is processed.

Will require file types PNG, SVG, EPS, AI or high quality JPEG.

Screenshots not accepted.

For use on wood-

• The wood must have 2 coats of fully cured Minwax Polycrylic
• Use a standard Iron
• Place your transfer in the desired location
• Heat on high with medium pressure for about 45 seconds

After you've heated your transfer, let cool. The paper will be stuck to the wood. You can remove as much paper by hand, then use a damp sponge to loosen up the remaining paper to remove. You may want to lightly sand and apply 1 more coat of Poly.

*Works best on bare (poly'd) wood*